Custom Logo Skateboard Travel Backpack

Product Detailed Description

A backpack built around a skate deck rather than a laptop. The body is cut from heavy polyester, a woven cloth with a visible grid to the hand, and the shell is sewn as one deep main box so a deck can lie flat against the back panel with shoes and a helmet stacked beside it. A zip runs across the top, and you open it, drop the gear in from above, then pull the slider closed and lift the bag by the shoulder straps. Padding sits where the straps meet the back panel, so the deck edge does not sit against the spine on the walk to the park or the ride to school.

• Main compartment is cut wide and tall enough to take a deck flat against the back panel, so the trucks do not press into your spine
• The polyester shell takes the scuff of grip tape and concrete edges without the surface going soft where it rubs
• Zip closure runs across the top of the bag, letting you drop shoes and a helmet in from above rather than threading them past the deck
• Two shoulder straps spread the load across the back, so a rider walks hands free from the car park to the bowl
• Sits on the shelf beside caps and tees as a logo carrier, with the front panel left flat as the place a brand mark reads